- Products: LTM2214-RM Rev.1.1
- Technical characteristics
- Electronic unit:
- Power supply: 220Vac approx.20W (115Vac upon request)
- Fuse: 1A delayed (220Vac, 115Vac)
- Display: LCD STN with led backlight, 20 characters x 4 rows (inside case)
- Display backlight: adjustable via keypad
- Display contrast: trimmer adjustable
- Internal clock: Crystal RTC, +/-10ppm/month, supplied by sealed lead 12V 1.2-1.5Ah backup battery (battery not supplied)
- Digital input:
- a) optically insulated pulse fuel consumption: 0/+5V, -5/+5V, 0/12V, -12/+12V, 0/+20mA
- Analog input:
- a) non insulated fuel consumption: 0/+3.3V, 0/+20mA, 4/+20mA (jumper and keypad selectable current input)
- Digital output:
- a) assignable alarm threshold: 1 pole changeover contacts relay 0.3A 24Vdc
- b) assignable alarm threshold: 1 pole changeover contacts relay 0.3A 24Vdc (shared with ETC)
- c) assignable alarm threshold: 1 pole changeover contacts relay 0.3A 24Vdc (shared with ETC)
- Serial output:
- a) RS232 9 pin male D type, with selectable speed (4800-9600-19200-38400-57600-115200-256000 Baud)
- b) RS422 9 pin female D type, with selectable speed (4800-9600-19200-38400-57600-115200-256000 Baud)
- Commands:
- Five pushbutton keypad (MENU (►), OK (◄), UP (▲), DOWN (▼), ON/OFF) inside case
- Signalling:
- a) red led (EOC - end of cycle) internal
- b) green led (laser pulse reception) internal
- c) red led (Alarm) internal
- d) red led (ON) internal
- Optical receiver (frame) – electronic unit interconnection cable length:
- a) standard: 12m
- b) higher lengths must be requested at the order
- Environmental:
- Temperature: -10°/+50°C
- Humidity: 10-98% relative non condensating
- Pressure: 700-1200mbar
- Acceleration: 4mm/s @ F<=800Hz; 2mm/sec @ F>800Hz
- Protection degree: IP55 (IP20 with door opened)
- Dimension (LxHxD):
- 400mm x 400mm x 200mm
- 15.75in x 15.75in x 7.78in
- Weight:
- 10kg (22lb) approx
-
- Optical receiver:
- Power supply (from the electronic unit):
- 18Vdc (protected against polarity inversion) or 18Vac, approx. 0.3A
- Signalling:
- a) red led (ON) on the board
- b) green led (laser pulse reception) on the board
- Protection: fuse 1A 220V delayed (mounted on the electronic unit)
- Adjustment: trimmer adjusted low pass filter cut frequency on the board
- Environmental:
- Temperature: -10°/+50°C (standard version); -20°/+70°C (extended temperature version)
- Humidity: 10-90% relative non condensating
- Pressure: 700-1200mbar
- Acceleration: 5mm/s @ F<=800Hz; 2.5mm/sec @ F>800Hz
- Protection degree: IP55
- Dimension (LxHxD):
- 260mm x 80mm x 74mm
- 10.24in x 3.15in x 2.91in
- Weight:
- 1.5kg (3.3lb) approx. (standard version); 3kg (6.6lb) approx. (extended temperature range)
-
- Laser transmitter unit:
- Laser wavelength: 670nm
- Laser beam power: 1.0mW (Class II)
- Beam shape: focused circular/eliptical dot
- Focused dot dimension: 100um typical
- Optics: single element with adjustable focus
- Power supply: 9Vdc protected against polarity inversion, approx. 50mA
- Environmental:
- Temperature: -10°/+50°C (standard version); -20°/+70°C (extended temperature version)
- Humidity: 10-90% relative non condensating
- Pressure: 700-1200mbar
- Acceleration: 5mm/s @ F<=800Hz; 2.5mm/sec @ F>800Hz
- Protection degree: IP55
- Dimension (LxHxD):
- 160mm x 58mm x 77mm
- 6.30in x 2.28in x 3.03in
- Weight:
- 1.5kg (3.3lb) approx. (standard version); 2kg (4.4lb) approx. (extended temperature version)
- Frame:
- Dimensions (LxHxD):
- 1320mm x 580mm x 180mm
- 52.0in x 22.83in x 7.8in
- Weight:
- 38kg (83.6lb) approx
- Protective covers:
- Dimensions (LxHxD):
- 580mm x 250mm x 130mm
- 22.83in x 9.8in x 5.1in
- Weight:
- 8kg (17.6lb) approx
- Performance:
- Performance figures measured at:
- Temperature: 20°C +/-20%
- Humidity: 50% +/-20% relative non condensating
- Pressure: 1013mbar +/-20%
- Acceleration: 1mm/s @ F<=800Hz; 0.5mm/sec @ F>800Hz
- Accuracy (Precision): <+/-0.7% of f.s.
- Resolution: +/- 1 digit
- Repeatability: <+/- 0.7% of f.s.
|
Laser Torque Meters |
|
 |
|
|
LTM2214 Rev.1.1 rugged version
|
|
